Product Name:Vinyl Ester Resin HS-4483B
1. Brief Introduction:HS-4483B is a premium vinyl ester resin meticulously formulated for rapid pultrusion molding. Boasting moderate viscosity and high reactivity, it significantly enhances pultrusion line speed. The resin also dramatically improves product surface gloss while minimizing shrinkage and internal microphase cracking.
Products manufactured using HS-4483B exhibit exceptional corrosion resistance, mechanical strength, and outstanding electrical properties. This resin is particularly ideal for reinforcing cores in fiber optic cables.
2. Technical Data Sheet for Liquid Resin:
Curing system in GT test: Hardener AKZO CH-50: 2%
3. Physical Properties of Casting (For Reference Only):
Note:
1) The casting is prepared following GB/T8237-2005. Curing System: Accelerator KC: 1.0%;
Hardener AKZO LPT: 1.0%;
2) Post Curing Process:RT
×
24hrs +60
ºC ×
3hrs +120
ºC ×
2hrs
4. Storage:
1) To ensure product integrity, store in a dry area away from heat sources like direct sunlight or steam pipes, with temperatures maintained below 25ºC.
2) Keep containers sealed to prevent moisture absorption and monomer loss. Prolonged storage outside recommended conditions may affect properties such as viscosity and gel time.
3) Transportation must comply with the State Council's 'Chemistry Dangerous Articles Safety Management Regulations.' Due to the presence of styrene monomer, this resin is classified as hazardous and inflammable.
