Product Name:Vinyl Ester Resin HS-4483B
1. Brief Introduction:HS-4483B is an advanced vinyl ester resin specifically engineered for rapid pultrusion molding. It boasts moderate viscosity, high reactivity, and can significantly enhance the pultrusion line speed. Additionally, it improves product surface gloss, reduces shrinkage, and minimizes internal microphase cracks.
Pultrusion products crafted with HS-4483B exhibit exceptional corrosion resistance, superior mechanical properties, and excellent electrical properties. This resin is particularly ideal for manufacturing fiber optic cable strengthening cores.
2. Technical Data Sheet for Liquid Resin:
Curing system in GT test: Hardener AKZO CH-50: 2%;
3. Physical properties of casting (for reference only):
Note:
1) The casting is prepared according to GB/T8237-2005; Curing System: Accelerator KC: 1.0%;
Hardener AKZO LPT: 1.0%;
2) Post curing:RT
×
24hrs +60
ºC×
3hrs +120
ºC×
2hrs;
4. Storage:
1) Avoid exposure to heat sources like direct sunlight or steam pipes. Store in a dry place at temperatures below 25ºC.
2) Ensure the container is sealed to prevent moisture absorption and monomer loss. Extended storage outside recommended conditions may affect liquid resin properties such as viscosity and gel time.
3) Transportation should comply with the State Council's 'Chemistry Dangerous Articles Safety Management Regulations'. Due to its styrene monomer content, it is classified as hazardous and inflammable.
