Product Name:Vinyl Ester Resin HS-4483B
1. Brief Introduction:HS-4483B is a revolutionary vinyl ester resin engineered specifically for rapid pultrusion molding. Characterized by its moderate viscosity and high reactivity, this resin significantly enhances pultrusion line speeds. Users will appreciate improved product surface gloss, reduced shrinkage, and minimized internal microphase cracking. Pultrusion
products crafted with HS-4483B boast exceptional corrosion resistance, mechanical robustness, and superior electrical properties. This resin is particularly ideal for the manufacture of fiber optic cable strengthening cores.
2. Technical Data Sheet for Liquid Resin:
Curing system in GT test: Hardener AKZO CH-50: 2%;
3. Physical properties of casting (for reference only):
Note:
1) The casting is prepared according to GB/T8237-2005 standards; Curing System: Accelerator KC: 1.0%;
Hardener AKZO LPT: 1.0%;
2) Post curing: RT
×
24 hours at room temperature, followed by 60
ºC ×
3 hours, and then 120
ºC ×
2 hours;
4. Storage:
1) Store in a cool, dry place away from heat sources like direct sunlight or steam pipes, at temperatures below 25ºC.
2) Ensure containers are tightly sealed to prevent moisture absorption and monomer loss. Extended storage outside recommended conditions may affect properties such as viscosity and gel time.
3) Follow 'Chemistry Dangerous Articles Safety Management Regulations' for transportation. Due to the presence of styrene monomer, it is hazardous and flammable.
