Wholesale CCS Certified Marine Epoxy Resin for Corrosion Resistant FRP Applications

• Customization: Available
• Molecular Principal Chain: Carbon Chain Polymer
• Color: Yellow Transparent Liquid
• Model NO.: HS-4430
• Geltime(25ºC): 10-30min
• Solid Content: 60.0-64.0%
• Acid Value: 5.0-13.0mgKOH/g
• Transport Package: IBC Tank/Drum
• Specification: Bisphenol A Epoxy Vinyl Ester
• Trademark: Xinshen/Huake
• Origin: Jiangsu, China
• HS Code: 3907910000
• Production Capacity: 100000 Ton/Year

Product Description

Product Description

 

Product Name:Epoxy Vinyl Ester Resin HS-4430

1. Brief Introduction:HS-4430 is a premium bisphenol A epoxy vinyl ester resin, meticulously crafted for various FRP productions, including anti-corrosive linings, FRP tanks, electrical insulating materials, and FRP molds. This versatile resin excels in hand lay-up, pultrusion, and filament winding processes, offering outstanding mechanical strength, toughness, as well as remarkable heat and corrosion resistance. It is distinguished as one of the finest resins ever designed for the marine industry.
premium resins ever designed for the marine industry.
2.Technical Data Sheet for Liquid Resin:

Item	Standard Requirements	Test Method
Appearance	Yellow Transparent Liquid	GB/T 8237.6.1.1
Viscosity(25ºC,cP)	400-500	GB/T 7193.4.1
Geltime(25ºC,min)	10.0-30.0	GB/T 7193.4.6
Solids Content(%)	60.0-64.0	GB/T 7193.4.3
Acid Value(mgKOH/g)	5.0-13.0	GB/T 2895

 

Curing system in GT test: Accelerator 0.6Co/Naph: 2%; Hardener AKZO LPT: 2%;
3. Physical properties of casting (for reference only):

Item	Unit	Test Value	Test Method
Tensile Strength	MPa	90	GB/T2568
Tensile Modulus	MPa	3000	GB/T2568
Breaking Elongation	%	6.3	GB/T2568
Flexural Strength	MPa	140	GB/T2570
Flexural Modulus	MPa	3400	GB/T2570
Impact Strength	KJ/m^2	19.5	GB/T2571
HDT	ºC	105	GB/T1634
Hardness(Barcol934-1)	--	42	GB/T3854

 

Note:
1) The casting is prepared according to GB/T8237-2005; Curing System: Accelerator KC: 1.0%;
Hardener AKZO LPT: 1.0%;
2) Post curing: RT×24hrs +80ºC×24hrs;

4 . Instructions and Attention:1) To minimize bubbles and achieve an extensive gel time range, a low-activity curing agent such as Butanox LPT by AKZO is recommended.
When used as an overcoat layer (e.g., the outermost layer of pipelines and tanks), paraffin must be added to ensure the expected curing degree.
2) The recommended paraffin addition is 300ppm (melting point 52~57ºC). To optimize paraffin benefits, the resin should have a short gel time (approximately 30 minutes).
3)To minimize bubbles and achieve a broad gel time range, low-activity curing agents like Butanox LPT by AKZO are recommended. When used as an overcoat layer (e.g., the outermost layer of pipelines and tanks), paraffin must be added to ensure the expected curing degree. The recommended addition is 300ppm (melting point 52~57ºC). To optimize paraffin benefits, the resin should have a short gel time (about 30 minutes).300ppm (melting point 52~57ºC). At the same time, to employ the paraffin to the best advantage, the resin should have a short gel time (about 30 minutes).
5. Storage:
1) Avoid exposure to heat sources such as direct sunlight or steam pipes. Store in a dry place at temperatures below 25ºC.
2) Keep sealed to prevent moisture pick-up and monomer loss. Prolonged storage outside of recommended conditions can affect liquid resin properties such as viscosity and gel time.
3) Transportation should comply with the State Council's 'Chemistry Dangerous Articles Safety Management Regulations'. Due to the presence of styrene monomer, it is classified as hazardous and inflammable.

Packaging & Shipping

Application

 

 

Certifications

 

 

 

FAQ